SunEvo & SunArk Product Catalog
Products

Deep Cycle 2V 3000Ah Opzv Gel Batteries 2 V Lead Acid Battery

OPzV series is Valve Regulated Lead Acid battery that adopts immobilized GEL and Tubular
Plate technology to offer high reliability and performance. 

 

  • Brand:

    SunArk
  • Cells Per Unit:

    1
  • Voltage Per Unit:

    2
  • Design Life:

    20 years (Float charging)
  • Standby Use Voltage:

    2.23V~2.25V @25°C
  • Cycle Use Voltage:

    2.40V~2.45V @25°C
  • Operating Temperature Range:

    Discharge: -15°C~50°C Charge: 0°C~40°C Storage: -15°C~50°C
  • Normal Operating Temperature Range:

    25°C ± 5°C
  • Self Discharge:

    Monthly Self-discharge ratio is less than 3.5% at 25°C.
  • Container Material:

    A.B.S. UL94-HB UL94-V0 Optional

New Products

What is OPzV Battery

 

OPzV series is Valve Regulated Lead Acid battery ,The Battery is designed andmanufactured according to DIN standards and with diecasting positive grid and patented formula of active material. OPzV series exceeds DIN standard values with more than 20 years
flfloating design life at 25°C, and It is the best solution for cyclic use under extreme conditions.Tubular colloidal batteries (OPzV series) have low self-discharge electrodes, are made of high-quality materials, and have a monthly self-discharge rate of ≤1.5%. They use colloidal electrolytes, have large heat capacity, and good heat resistance. They are suitable for use in harsh environments (40~60°C).It is widely used in new energy systems such as medium and large energy storage, electric power,communication, petrochemical, rail transit, and solar and wind energy. 

OPzV Battery Introduction:

 

OPzV battery has stable capacity, low attenuation rate, excellent sealing performance, no gas permeation, and no pollution to the environment during normal floating charging. It is an environmentally friendly product. It has excellent safety performance, special separator, high porosity, low resistance, and low internal resistance. The copper pole ensures safe discharge of large currents without heating. The concentration of solid gel electrolyte is evenly distributed without delamination.Stable capacity, low attenuation rate, excellent sealing performance, no gas penetration, no pollution to the environment, etc.It has a wide range of application scenarios and is suitable for medium and large-scale energy storage. Widely used in industrial and commercial energy storage, power generation side energy storage, grid side energy storage, data center (IDC energy storage), nuclear power plants, airports, subways and other fields with high safety requirements

Why Choose OPzV Battery?

 

(1) The self-heating temperature of the battery does not exceed the ambient temperature by 5°C, minimizing self-heat loss.

(2) The internal resistance of the battery is low, and the energy consumption of the battery energy storage system with a capacity of more than 2000Ah is within 10%.

(3) The self-discharge of the battery is small, and the monthly self-discharge capacity loss is less than 1%.

(4) The battery is connected by large-diameter annealed copper wire, which has low contact resistance and small wire loss.

(5) Wide temperature range, -45℃~+65℃, can be widely used in various scenarios.

(6) Applicable to medium and large rate discharge: meet the application scenarios of one charge and one discharge and two charges and two discharges.

  1.  
OPzV Battery's Features:
 
1. Electrolyte: Made of German fumed silica, the electrolyte in the finished battery is in a gel state and does not flow, so there is no leakage and electrolyte stratification.
2. Pole plate: The positive plate adopts tubular plate, which can effectively prevent the active material from falling off. The positive plate skeleton is formed by die-casting of multi-element alloy, which has good corrosion resistance and long service life. The negative plate is a paste-type plate, and the special grid structure design improves the utilization rate of active materials and high-current discharge capacity, and has a strong charge acceptance capacity.
3. Battery shell: Made of ABS material, corrosion-resistant, high strength, beautiful appearance, high reliability of sealing with the cover without potential leakage risk.
4. Safety valve: special safety valve structure, suitable opening and closing valve pressure, reduces water loss, and can avoid battery shell expansion, rupture and electrolyte drying up.
5. Separator: The special microporous PVC-SiO2 separator imported from the European AMER-SIL company is adopted. The separator has large porosity and low resistance.
6. Terminals: Embedded copper core lead-based poles have greater current carrying capacity and corrosion resistance.

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • Opzv Battery 2V 1000Ah
    Opzv Batteries 2Volt 2V 1000Ah Tubular Cell Lead Acid Battery

    OPzV series is Valve Regulated Lead Acid battery that adopts immobilized GEL and Tubular Plate technology to offer high reliability and performance.   

  • Deep Well DC 24V 48V 200W 300W 400W Submersible Solar Pumps

    A solar water pump is a system that uses electricity generated by solar panels to drive a pump, typically used for agricultural irrigation, livestock watering, water supply in rural or remote areas, and other applications. The main components of a solar water pump system include solar panels, a controller, a pump (such as a submersible or surface pump), and an optional battery for storing excess energy. Its working principle involves converting solar energy into electrical energy to power the pump, which extracts or delivers water, offering an energy-efficient and self-sustaining water supply solution.

  • lead carbon battery
    SunArk 12V 100Ah Lead Carbon Battery ABS Case Long Cycle Life

    SunArk Lead-carbon batteries offer a reliable, cost-effective energy storage solution that bridges the gap between traditional lead-acid and high-cost lithium-ion batteries. They are ideal for applications where durability, high cycling capability, and environmental friendliness.

  • jinko solar
    Jinko Tiger Neo N-type JKM-N-78HL4RBDV 620W 625W 630W Solar Panel

    JinkoSolar is a leading solar panel manufacturer known for its high-quality products and innovative solar solutions. One of their flagship products is the JKM-N-78HL4RBDV 630W solar panel, which boasts excellent performance and efficiency.

  • shingled solar panels
    Black Frame Shingled Monocrystalline PV Solar Module

    Shingled modules are an innovative solar photovoltaic technology that uses laser slicing technology and conductive adhesive connections to realize stacked connection packaging of solar cells, creating a superior circuit connection effect with zero spacing between solar cells. It has significant advantages such as optimal circuit connection effect, higher energy density, and higher power generation performance. By reducing line losses and BOS investment costs for system-side owners, shingled modules become more competitive in the photovoltaic industry.

  • TOPCon Bifacial Dual Glass Solar Module 625W
    EVO5N 625W Bifacial N-type TOPCon 156 Cells Solar Module

    EVO 5N Series Bifacial modules combine leading N-type TOPCon technology, 182mm silicon wafer, and half-cell. 30 years lifespan brings 10-30% additional power generation compared with conventional P-type modules. The SunEvo N-type Bifacial Half-cell Module can reach a power output range between 605W to 625W.

  • ja solar panel 455Watt
    JA Solar N-Type Bifacial Solar Module Series Mono 445W 455W

    JA solar JAM54D40 series is an n-type bifacial double glass high-efficiency mono module, with higher power generation better LCOE, n-type with very lower LID, better temperature coefficient, and better low irradiance response features, the max output power is 455W.

  • All-in-one Hybrid Solar System
    Hot Sell All-in-one 8KW 12KW All Black Solar Module Power Hybrid System

    Hot sell all-in-one 8KW 12KW all black solar module power hybrid system is divided into three working modes. Mode 1: Photovoltaics provide energy storage and surplus electricity is connected to the grid; Mode 2: Photovoltaics provide energy storage and some users use electricity; Mode 3 : Photovoltaics only provide partial energy storage.

Top
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

Company

whatsapp