Brand:
SunArkCells Per Unit:
6Voltage Per Unit:
12VDesign Life:
20 years (Float charging)Standby Use Voltage:
13.6V~13.8V @25°CCycle Use Voltage:
14.2V~14.4V @25°COperating Temperature Range:
Discharge: -15°C~50°C Charge: 0°C~40°C Storage: -15°C~50°CNormal Operating Temperature Range:
25°C ± 5°CSelf Discharge:
Monthly Self-discharge ratio is less than 3.5% at 25°C.Container Material:
A.B.S. UL94-HB UL94-V0 Optional
Product Features:
FT Battery Characteristics:
Front Terminal Lead-Acid Battery is a uniquely designed lead-acid battery. Its positive and negative terminals are located at the front of the battery, which is easy to install and maintain.
The design of the front-terminal lead-acid battery makes it suitable for applications requiring frequent maintenance or battery replacement. Traditional lead-acid batteries usually need to be maintained from the top or side, while the terminals of front-terminal batteries are located at the front, which makes installation and maintenance more convenient.
This type of battery is commonly found in applications that require high-capacity power support, such as telecom base stations, data centers, UPS systems (uninterruptible power systems), etc. Front-terminal lead-acid batteries usually have higher capacity, longer life and lower internal resistance to meet the long-term backup power supply needs.
Front Terminal Battery Application:
Front-terminal lead-acid batteries typically have a sealed design and can operate without the need for water addition or electrolyte checks. This sealed design prevents battery acid from leaking and reduces the need for maintenance work.
In a word, the front terminal lead-acid battery is a specially designed lead-acid battery, the positive and negative terminals at the front make it have obvious advantages in installation and maintenance, and it is suitable for applications requiring large-capacity backup power.
application field;
1. Communication system
2. Power system
3. UPS uninterruptible power supply
4. Solar and wind energy systems
5. Substation system
FT (Front Terminal) series is specially designed for telecom use with 12 years design life in float service. By adopting a new AGM separator and centralized venting system, the battery can be installed in any position while maintaining high reliability. The dimensions of the FT series are designed for 19" and 23" cabinet installation. It is suitable for telecom UPS / EPS applications.
The SUN-29.9/30/35/40/50K-SG01HP3-EU-BM2/3/4 is a state-of-the-art three-phase hybrid inverter that offers advanced features and functionalities in renewable energy systems. It is designed to support a wide range of applications and ensure efficient power conversion.
A battery storage container refers to a structure or enclosure specifically designed to safely store and protect batteries. Batteries can be hazardous if mishandled or exposed to certain environmental conditions, so battery storage containers are essential for maintaining their integrity, preventing leakage, and minimizing the risk of accidents or damage.
SunArk M6000HX-48-BP is very popular among residential solar system because of its advanced technology, which is designed to optimize energy conversion and maximize system efficiency.
Deye outdoor cabinet is an energy storage device designed for outdoor environments. It has an IP65 high protection level and corrosion-resistant materials, and is suitable for harsh conditions such as high temperature and humidity. It adopts intelligent temperature control and modular structure, supports flexible expansion and remote monitoring, integrates multiple safety protections, and can be efficiently used in scenarios such as home energy storage, photovoltaic power stations and off-grid power supply. It is easy to install and stable in operation.
Evo 5 Series 144 Half Cells 535W 540W 545W 550 Wp 555 Watt Solar PV Panels TOPCon Commercial Monocrystalline MBB Bifacial Double Side Glass Photovoltaic Solar Panel Module Based on 182mm Solar Cell
DEYE three phase 30kw 35kw 40kw 50kw hybrid inverter with High voltage battery 160-800V, ensuring system efficiency and less heat dissipation. With compact design and high-power density, this series supports 1.3 DC/AC ratio, saving device investment. It supports three phase unbalanced output, extending the application scenarios.
Different from traditional modules, SunEvo shingled modules arrange photovoltaic cells closely in a series-parallel structure and require almost no soldering ribbons. In the same size, more than 13% more cells can be placed than conventional modules. Therefore, the laminated module has the advantages of high output power, low internal loss, and a small reverse current hot spot effect. Our minimum order quantity is 1 pallet.
IPv6 network supported
français
Deutsch
italiano
español
português
العربية
日本語
Polski
ไทย
