Our 210mm N-Type Topcon Solar Panels offer unmatched performance with features like reduced LID and enhanced PID resistance, ensuring durability and stability for high-efficiency modules. With minimized sealing damage and CTM loss rates, they're designed to optimize energy output. Plus, boasting a low power temperature coefficient of -0.30%/°C, they excel even in low irradiance environments, achieving a remarkable relative conversion efficiency of up to 98% under low light conditions (200W/m²). With impressive front efficiency of 25% and a bifaciality rate exceeding 80%, our panels deliver exceptional conversion efficiency for maximum energy generation.
Brand:
SunEvoMdel:
210 mono-crystalline Bifacial solar cell (SE-210M-18D1)Dimension:
210mmx210mm±0.25mm, Φ 295mm±0.25mmThickness:
150μm±20μmFront:
18 busbars, 12 pads, 148 fingers, busbar width 0.045±0.02mmBack:
18 busbars, 12 pads, 140 fingers, busbar width 0.045±0.02mmProduct Characteristics
A solar-powered air conditioner operates using energy generated from solar panels or solar collectors. The components inside a solar-powered air conditioner are similar to those found in a conventional air conditioner but with the addition of a solar power system.
An off-grid inverter is a device that converts solar energy into usable AC electricity for homes or businesses that are not connected to the traditional power grid.
The 710W HJT module combines cutting-edge technology, superior product features, and high-efficiency performance to redefine the standards of solar power generation. Combining the gettering process and single-side μc-Si technology to ensure higher cell efficiency and higher module power.
Discover Sunark's Containerized Lithium Battery, the ultimate power solution for commercial and industrial needs. With a capacity of 215kWh, operating at 768V and 280A, our compact container packs PCS, controller, lithium battery, fire protection, and air conditioning systems all in one. Achieve peak efficiency with a 97.6% energy conversion rate, while enjoying hassle-free installation and transportation - all pre-assembled, no on-site battery handling required. Safety is paramount with multi-level battery protection layers, while intelligent monitoring and management give you full control. Experience the future of energy storage with Sunark.
A Brushless Solar Pump with a Plastic Impeller is a type of solar-powered pump that uses a brushless DC motor and features an impeller made of plastic for moving water. These pumps offer eco-friendly operation by using renewable solar energy, reducing the carbon footprint. Their brushless motors and plastic impellers ensure low maintenance with minimal servicing needs, leading to lower costs. Additionally, they deliver reliable performance in varying sunlight conditions, providing consistent water output throughout the day.
A fast charging AC electric vehicle (EV) charger, also known as Level 2 charger, is a type of charger that provides higher charging power compared to standard home chargers. Level 2 chargers typically use a 240-volt power source, which allows for faster charging times compared to standard 120-volt outlets.
The APSystems EZ1-M microinverter is an innovative and efficient solution for residential and commercial solar energy systems. It offers a range of features that ensure optimal performance, ease of installation, and advanced monitoring capabilities.
SunArk Lifepo4 5kW 10kW Powerwall 51.2V 200Ah wall-mounted lithium battery can realize multiple intelligent protection, 360°all-round protection, in line with the concept of low carbon, energy saving, and environmental protection, and the reliable intelligent BMS and wall-mounted design can provide high-efficiency, Energy saving and stable power supply.
IPv6 network supported
français
Deutsch
italiano
español
português
العربية
日本語
Polski
ไทย
